With the improvement of intelligent production, five axis machining centers are used more and more widely. Five axis machining centers are used in rail transit, aerospace, solid wood furniture production, mold / sculpture production, new energy / RV production and other industries. Its processing efficiency and precision are very high, and it can be used for fine processing and production of various parts with complex shapes. How should the five axis machining center be operated? What should we pay attention to in the production process?

First of all, although the five axis machining center is an intelligent production equipment, it still needs some manual operations in the early stage. Check whether some clamping is normal and whether the cutting tools are in place. These need to be carefully checked by the operator. Especially for novices, they should not only look at the operation and inspection of the master, but also do it by themselves to be familiar with and understand the use performance and clamping principle of the equipment. Don't just stay in theory, you should do it yourself and practice more.

Secondly, the five axis machining center is a high-precision intelligent production equipment. The operator must be careful to avoid equipment damage caused by undetected problems. For example, when clamping the tool, the size of the tool must be changed in strict accordance with the processing instructions, and the wrong tool cannot be installed. Whether the parameter settings of the control system are correct or not requires careful inspection by the operator.

Third, look at the drawings frequently. The processing requirements of the processed workpiece are clearly indicated on the drawing, and the size of the processed workpiece must correspond to the size on the drawing. If a measuring ruler is needed in the processing process, the equipment needs to be operated in a completely stopped state to avoid personal injury caused by the equipment. See more pictures, observe more and measure more, so as to ensure the production qualification rate of the five axis machining center.

Fourth, work safety. It is necessary to have awareness when operating any equipment, operate in strict accordance with the equipment operation specifications, and form a good safety awareness.

Although the five axis machining center is an intelligent production equipment, which brings great convenience to the intelligent production of various industries and fields, it still needs manual operation as an equipment, which will also affect the production accuracy of the equipment. Therefore, operators need to have a good operation specification in the use process.

Key words: Qingdao five axis machining center